Apple Workgroup Server 9150/120 - Manual (Page 32)

Turning the server off
You need to turn off the server to perform the tasks in Chapter 2, “Connecting
to the Network.”
m Use the mouse to choose the Shut Down command from the Special menu.
Choosing Shut Down readies the hard disk for a fast restart next time you turn
on the server. You will be prompted to save any unsaved work on a disk before
turning the power off.
To turn on the server again, just press the Power On key on the keyboard.
IMPORTANT Be sure to shut down the server if you need to do any of
the following:
m move the server
m connect other equipment to the server
m unplug the server
WARNING If you turn the server off by by turning the key lock switch to
the “off” position, you will lose any work you haven’t previously saved
onto a disk. You also risk losing open documents.
16 Chapter 1 / Setting Up Your Server