Apple Workgroup Server 9150/120 - Manual (Page 24)

2 Connect the monitor’s power cord to the monitor.
On some monitors, the cord is already attached.
3 Plug in the monitor’s power cord.
Some power cords are designed to plug into the back of your server. You
can also plug the power cord into a grounded electrical outlet (an adapter
may be needed).
Note: Some monitors have to be connected to a grounded power outlet, not to
the server’s power socket. Check the information that came with the monitor.
Plug the monitor power
cord into this socket.
8 Chapter 1 / Setting Up Your Server