Apple Color StyleWriter 1500 - Manual (Page 50)

Premium coated paper
m Use only coated paper designed for use with StyleWriter printers.
m One side of the paper is a little whiter than the other and is better for
printing. See the package label on the coated paper to determine which
side is better, and load that side so that it faces you.
Glossy paper
m Use only glossy paper designed for use with StyleWriter printers.
m When loading a stack of glossy paper into the sheet feeder, put a single
sheet of plain paper at the back of the stack to prevent misfeeding.
Back-print film
Back-print film has a shiny surface and works exceptionally well when
displayed by backlighting.
m Use only back-print film designed for use with StyleWriter printers.
m Load back-print film so that the chalky side faces you.
m When loading a stack of back-print film into the sheet feeder, put a single
sheet of plain paper at the back of the stack to prevent misfeeding.
m In the Print dialog box, be sure to select Back Print as the paper type.
m The printer automatically reverses the image and prints it on the film’s
chalky side so that the image looks correct when viewed from the
shiny side.
Transparencies
Use transparencies when you want to present your document on an overhead
projector.
m Use only transparencies designed for use with the Color StyleWriter 1500.
These special transparencies have a sheet of paper attached to them; leave
the paper attached until after printing Transparencies designed for laser
printers or copiers work very poorly on the Color StyleWriter 1500.
m Load the transparencies so that the shiny side faces you and the edge
where the paper and the transparencies are attached points downward.
50 Chapter 3