Apple Video Phone Kit - Manual (Page 9)

IMPORTANT After you have installed the software you want, you need to
restart your computer. If you specified the Apple VideoPhone Kit CD as your
startup disk in the Startup Disk control panel, you must reset the Startup Disk
control panel before you restart your computer.
Installing System 7.5.3
If system software version 7.5.3 or later is already installed on your computer,
you can skip this step.
System 7.5.3 includes all the enhancements introduced in System 7.5,
System 7.5 Update 1.0, and System 7.5 Update 2.0. Before you install the
system software, see the electronic document “About System 7.5,” available
in the System 7.5.3 Software Install folder on the CD.
Before you begin, use the Drive Setup program to update your disk drivers.
You may also want to use the Disk First Aid program to test and, if necessary,
repair the disk on which you’re going to install the update. (The Drive Setup
and Disk First Aid programs are located on the CD, in the Disk Tools folder.)
Follow these steps to install System 7.5.3:
1 Open the System 7.5.3 Software Install folder on the CD.
2 Double-click the Installer icon to open it.
3 Read the message that appears. If you agree to the terms, click Agree.
4 In the Easy Install dialog box, make sure the disk named in the Destination Disk section
is the one on which you want to install the software. If it isn’t, click Switch Disk until the
correct disk name appears.
5 Click Install.
All necessary system software is installed on the selected disk.
6 When installation is complete, click Quit.
9