Apple Video Phone Kit - Manual (Page 8)

8
Installing the software
This section describes how to install the software you need to begin using
your Apple VideoPhone Kit. The software is located on the Apple VideoPhone
Kit CD-ROM disc.
First, start up your computer using the Apple VideoPhone Kit CD. To do so,
follow these steps:
1 Insert the Apple VideoPhone Kit CD into your CD-ROM drive.
2 Turn your computer off.
The CD-ROM disc will remain in the CD-ROM drive.
3 Hold down the C key on your keyboard and restart your computer.
Continue to hold down the key until you see the Welcome to Macintosh message.
IMPORTANT If your computer will not start up from the Apple VideoPhone Kit
CD, you need to specify the CD as the startup disk in the Startup Disk control
panel. Open the Apple (K) menu and choose Control Panels, then double-
click the Startup Disk control panel to open it. In the control panel, click the
Apple VideoPhone Kit CD icon, then close the control panel and restart your
computer.
Once the computer has started up from the CD, install the following software:
m System 7.5.3 (If you are already using system software version 7.5.3 or later,
you can skip this step.)
m System 7.5.5 Update (You don’t need to install this update, but it’s highly
recommended.)
m Open Transport 1.1.1
m Apple VideoPhone software
You may also want to install Farallon Timbuktu Pro, which enables you to
share applications with other Timbuktu Pro users, and Adobe Acrobat
™
Reader, which you’ll need to read the electronic Timbuktu Pro user’s manual.