Apple Video Phone Kit - Manual (Page 17)

Disconnecting from the Internet
To disconnect from the Internet, click Disconnect in the Apple Internet
Status window.
IMPORTANT When you use the Apple Internet Dialer to connect to the
Internet, the dialer automatically replaces the current TCP/IP configuration
with settings that are specific to the dialer. When you are done using the
dialer, you can restore the previous settings in the TCP/IP control panel. Note
that you must restore these settings to continue using your videoconferencing
software in a non-Internet network environment.
To restore your previous settings, follow these steps:
1 Open the Apple (
K
) menu and choose Control Panels.
2 Double-click the TCP/IP control panel to open it.
3 Choose Configurations from the File menu.
4 Click Default (or the name of the configuration you typically use), then click Make Active.
5 Close the control panel.
Camera technical information
Lens
m Focal length:
6.0 millimeters (mm)
m F-stop:
2.8
m Focus:
Manual (2 inches to infinity)
Pick-up system
m Image device:
1/3 inch CCD
m Pixels (approx.):
Effective: 250,000 (512 x 492)
Total: 270,000 (542 x 497)
Sensitivity
m Standard illumination:
1,500 lux
m Minimum illumination:
60 Hertz (Hz) mode: 5 lux
50 Hz mode: 10 lux
m Maximum illumination:
100,000 lux
17