Apple Video Phone Kit - Manual (Page 3)

Care and cleaning instructions
For your own safety and that of your equipment, always take the following
precautions:
m Keep your camera away from sources of liquids, such as washbasins,
bathtubs, shower stalls, and so on.
m Protect your camera from dampness or wet weather, such as rain, snow,
and so on.
m Keep these instructions handy for reference by you and others.
To clean the camera, do the following:
1 Make sure the camera is disconnected from the computer.
2 Wipe plastic surfaces lightly with a clean, soft cloth dampened with water.
3 Clean the lens only with tissue intended for camera lenses, available from any
photographic supply store.
Connecting the camera to your Macintosh
1 Turn off the computer.
2 Attach the integrated cable to the camera and the S-video input port on the back of
the computer.
Attach the single plug at one end of the cable to the S-video input port on the
back of the computer. Then attach the two plugs at the other end of the cable
to the Video Out and DC In ports on the camera.
V
IRIS DC IN 12V
VIDEO OUT
+
- + -
OFF
ON POWER
(æ)
S-video input port
V
IRIS
DC IN 12V
VIDEO OUT
+
-
+
ж
3