Important application specific settings, Engine, Cam/crank – AEM Infinity Supported Applications - Toyota 1993-1997 Supra Turbo User Manual

Page 4: Ignition sync, Idle stepper max steps, Infinity tuner wizard setup engine

IMPORTANT APPLICATION SPECIFIC SETTINGS

Infinity Tuner Wizard Setup

Engine

In the Wizard Engine tab confirm the following settings:

Number of Cylinders

= 6

Engine Cycle Type

= 4 Stroke

Ignition Type

= Sequential (Coil On Plug)

Firing Order

= 1-5-3-6-2-4

Cam/Crank

In the Wizard Cam/Crank tab confirm the following setting:

Toyota Supra (1993–1998 Turbo)

Open the Advanced Setup tab and set the following:

Crank Noise Cancellation

= 70

Cam 1 Noise Cancellation

= 70

Add the 1-Axis Lookup Table VR_PwmDuty [%] to your layout. Set the following:

Ignition Sync

Add a text grid control to your layout and select the following channels. Make sure their values match
the settings below for initial timing sync.

TrigOffset [degBTDC]

= 23.00

CamSyncAdjustment

= 11.00

See QuickStart Guide section Setup: Ignition Sync for instructions on timing sync.

Idle Stepper Max Steps

Go to Setup Wizard Idle page and confirm the following setting:

Idle Stepper Max Steps = 33