AEM Infinity Supported Applications - Toyota 1993-1997 Supra Turbo - Manual (Page 13)

Infinity Supported Application 13
© 2014 AEM Performance Electronics
Infinity
Pin
Hardware Reference
7100-XXXX-62
7101-XXXX-63
Function
Hardware Specification Notes
C1-43 HighsideSwitch_1 HS1 (switched 12V)
0.7A max, High Side Solid State
Relay
See Setup Wizard page 'HighSide
Assigment Tables' f or conf iguration options.
See 2D lookup table 'HS1_Table' f or
activ ation settings.
C1-44 HighsideSwitch_0 VTEC
0.7A max, High Side Solid State
Relay
See Setup Wizard page 'HighSide
Assigment Tables' f or conf iguration options.
See 2D lookup table 'HS0_Table' f or
activ ation settings.
See Setup Wizard page 'VTEC' f or def ault
activ ation criteria.
C1-45
Crankshaf t Position
Sensor VR+ Crankshaf t Position
Sensor VR+ Dif f erential Variable Reluctance
Zero Cross Detection
See Setup Wizard page Cam/Crank f or
options.
C1-46
Crankshaf t Position
Sensor VR- Crankshaf t Position
Sensor VR-
See Setup Wizard page Cam/Crank f or
options.
C1-47
Camshaf t Position Sensor
1 VR- Camshaf t Position
Sensor 1 VR-
Dif f erential Variable Reluctance
Zero Cross Detection
See Setup Wizard page Cam/Crank f or
options.
C1-48
Camshaf t Position Sensor
1 VR+ Camshaf t Position
Sensor 1 VR+
See Setup Wizard page Cam/Crank f or
options.
C1-49 VR+_In_2
Non Driv en Lef t
Wheel Speed Sensor
+ Dif f erential Variable Reluctance
Zero Cross Detection
See Non Driv en Wheel Speed Calibration in
the Setup Wizard Input Function
Assignment page.
C1-50 VR-_In_2
Non Driv en Lef t
Wheel Speed Sensor -
C1-51 VR-_In_3
Driv en Lef t Wheel
Speed Sensor - Dif f erential Variable Reluctance
Zero Cross Detection
See Driv en Wheel Speed Calibration in the
Setup Wizard Input Function Assignment
page.
C1-52 VR+_In_3
Driv en Lef t Wheel
Speed Sensor +
C1-53 DBW1 Motor -
DBW Motor Control
Close
5.0A max Throttle Control Hbridge
Driv e
+12V to close
C1-54 DBW1 Motor +
DBW Motor Control
Open
5.0A max Throttle Control Hbridge
Driv e
+12V to open
C1-55 Power Ground Ground Power Ground Connect directly to battery ground.
C1-56 Injector 6 Injector 6
Saturated or peak and hold, 3A
max continuous
Injector 6
C1-57 Injector 5 Injector 5
Saturated or peak and hold, 3A
max continuous
Injector 5
C1-58 Injector 4 Injector 4
Saturated or peak and hold, 3A
max continuous
Injector 4
C1-59 Injector 3 Injector 3
Saturated or peak and hold, 3A
max continuous
Injector 3
C1-60 Power Ground Ground Power Ground Connect directly to battery ground.
C1-61 +12V +12V In 12 v olt power f rom relay
12 v olt power f rom relay . Relay must be
controlled by +12V Relay Control signal, pin
C1-29 abov e.
C1-62 Injector 2 Injector 2
Saturated or peak and hold, 3A
max continuous
Injector 2
C1-63 Injector 1 Injector 1
Saturated or peak and hold, 3A
max continuous
Injector 1
C1-64 +12V +12V In 12 v olt power f rom relay
12 v olt power f rom relay . Relay must be
controlled by +12V Relay Control signal pin
C1-29 abov e.
C1-65 +12V_SW Ignition Switch 10K pulldown
Full time battery power must be av ailable at
C1-10 bef ore this input is triggered.
C1-66 Analog_In_Temp_1 Coolant Temp Sensor 12 bit A/D, 2.49K pullup to 5V
See "Coolant Temperature" Setup Wizard f or
selection.