AEM 30-8760 CAS Trigger Disc - Manual (Page 24)

6
Reinstall the screw that holds the CAS disc with some red threadlocker with the #2 Phillips
screwdriver as shown in figure 7.
Figure 7: Screw and collar to hold CAS reinstalled with red threadlocker
Reassemble the rest of the items in the reverse order of disassembly.
Also note that the base calibrations were created with the distributor mounted in the
central adjustment position (two screws shown below) on our test vehicle. See figure 8
below:
Figure 8: Adjustment screws set to central position