Overview, Getting started, Downloadable files – AEM 30-3509 Infinity Plug & Play Harnesses - Honda/Acura OBD2B User Manual
Page 2: Options
2
© 2014 AEM Performance Electronics
P/N 30-3509
OVERVIEW
The 30-3509 AEM Infinity Adapter Kit was designed for the 1999
–
2001 Honda B-H-D Series OBD2b. This
is a true standalone system that eliminates the use of the factory ECU. The use of this adapter makes
the kit “plug and play” so no cutting or splicing wires is necessary. The base configuration files available
for the Infinity EMS are starting points only and will need to be modified for every specific application.
The available AEM Infinity EMS part numbers for this adapter kit are:
30-7106 INFINITY-6
30-7108 INFINITY-8h
GETTING STARTED
Refer to the 10-7100 for EMS 30-7100 Infinity Quick Start Guide for additional information on getting
the engine started with the Infinity EMS. The base session is located in C:\Documents\AEM\Infinity
Tuner\Sessions\Base Sessions
DOWNLOADABLE FILES
Files can be downloaded from
. An experienced tuner must be available to configure
and manipulate the data before driving can commence. The Quick Start Guide and Full Manual describe
the steps for logging in and registering at
download in the Support section of the AEM Electronics website:
Downloadable files for 1999
–
2001 Honda B-H-D Series OBD2b
7106-XXXX-75 (for 30-7106, INFINITY-6) (XXXX = serial number)
7108-XXXX-76 (for 30-7108, INFINITY-8h) (XXXX = serial number)
OPTIONS
30-3501-00 Honda Coil Adapter
Ignition adapter to drive factory Honda distributor internal coil. REQUIRED for use with Honda distributor if
not converting to a sequential coil-on-plug setup
30-2001 UEGO Wideband O2 Sensor
Bosch LSU4.2 Wideband O2 Sensor that connects to AEM 30-3600 UEGO Wideband O2 Sensor
Extension Harness
30-3600 UEGO Wideband O2 Sensor Extension Harness
Extension harness to connect AEM UEGO Wideband O2 sensor to 6-pin Deutsch
30-3602 IP67 Logging Cable
USB A-to-A extension cable: 39” long with right angled connector and bayonet style lock