PHCC Pro Series Pro Series C11 - Manual

Instruction
Manual &
Safety
Warnings
Table of Contents
Important Safety Warnings and
Instructions
Electrical precautions 1
Battery preparation 1
Battery precautions 1
Introduction
Items included in system 2
Additional items needed 2
System specifications 2
Installing the Pipe and Pump 3
Battery Instructions 4,5
System Connections
Mounting the control unit 5
Connecting the backup pump 5
Installing the battery fluid sensor 5
Connecting the battery 6
Connecting the charger 6
Connecting the primary pump 6
Product Operation
Float switches 6
1/8” weep holes 6
Controllers 6
Understanding the Warning
Lights and Alarms
Silencing the alarm during
an emergency
7
Power alarm 7
Battery fluid low 7
Refilling the battery 7
Pump was activated 8
Replacing the backup pump 8,9
Replacing the primary pump 10,11
System operating 11
Battery corroded or defective 11
Cleaning battery terminals 12
Replacing the battery 12,13
Test-reset button 13
Testing the System
Testing the backup float switch 13
Testing the primary float switch 13,14
Maintenance Check List 14
Parts & Service Information
Technical support 14
Replacement Parts Diagram & List 15
Troubleshooting Guide 16
Warranty 17
Pro Series C11
Combination Primary and
Backup Sump Pump System