J.P. Instruments EDM 960 Twin Pilots Guide - Manual (Page 68)

Quick Reference Guide
For Your Safe Flight Page 63
Power
Up
Main 75.0 GAL
Adjust? + 0.0 GAL
*
Main+Aux 115 GAL
Program
Mode
REFUEL?
REFUEL EXIT
REFUEL?
REFUEL NEXT
SAVE NEXT
SAVE NEXT
SAVE NEXT
ADD/
REMOVE
Next
Item
Exit
Store
Store
Store
*
If no aux tank is set up,
then this step is skipped.
ADD/
REMOVE
ADD/
REMOVE
Refueled the Aircraft
• Temporary reset (next 10
minutes): tap STEP .
Reset Alarm
• Reset for remainder of flight:
hold STEP until the words Alarm
Off appears.
1. Pre-lean & wait 20 seconds.
Leaning Rich of Peak
2. Tap LF & see ROP .
3. Lean until LEANEST flashes, then
EGT 1485 FF 12.7 appear.
4. Tap LF to see degrees lean of
peak: EGT- 23 FF 12.7
5. Enrich back to rich side of peak,
then set desired degrees rich of
peak:
EGT- 41 FF 13.9
6. If desired, hold LF to see temp &
FF when peak occurred:
EGT 1534 FF 13.2
7. Tap EXIT to return to normal
operation.
1. Pre-lean then wait 20 seconds.
Leaning Lean of Peak
2. Tap LF ( if you see ROP, then h old
STEP & LF until LOP appears ).
3. Lean mixture noting that inverted
columns appear.
4. Continue leaning until RICHEST
flashes then
EGT -73 FF 10.4 appear.
5. Adjust mixture to desired degrees
lean of peak:
EGT- 54 FF 10.9
6. If desired, hold LF to see the peak
EGT of first cylinder to peak and
the delta fuel flow (GAMI
spread):
EGT 1560 FF 1.0
7. Tap EXIT to return to normal
operation.