Hornady Lock-N-Load Powder Measure with Case-Activated Powder Drop User Manual
Page 14
- 13 -
Step 4: Installing the Case Activated Powder Drop (Lower Assembly)
Screw the Measure Adapter (Lower Assembly) into the reloading press a couple
of turns.
Select the appropriate powder bushing sleeve for your application. (Each sleeve has
a shallow countersink on one side, and a deep counter sink on the other.) Insert the
bushing, with the deep counter sink facing up, into the top of the measure adapter.
If using a Drop Thru Expander Powder Sleeve, insert the Expander with the deep
countersink facing up, into the top of the Measure Adapter.
The Case Activated Powder Drop comes with three internal powder bushing sleeves.
The longest is the pistol powder sleeve (#20). Powder sleeve (#19) has the smallest
inside diameter and works for loading 20 to 270 caliber rifle cases. The third and
shortest powder sleeve is for loading 7MM to 45 caliber rifle cases.