Hornady Lock-N-Load Powder Measure with Case-Activated Powder Drop User Manual
Page 13

- 12 -
Step 3: Drop Tube Installation
Screw the Drop Tube (#16) into the bottom of the Powder Measure.
Lubricate the exterior of the Drop Tube (#16) with Hornady One Shot Gun Cleaner
and Dry Lube or other similar dry lubricant.
Fig. 3: Drop Tube Installation.
16
PIVOT LOCATED
ACROSS FROM
ROTOR CENTERLINE
ROTOR “CENTERED”
L-N-L POWDER MEASURE