Hyline Offroad CJ LOUVERED HOOD PANEL User Manual
Page 4
Step 9 – Remove template and use a file or sandpaper to deburr any sharp edges from panel cutouts and/or
drilled holes. Remove masking tape also if necessary.
Step 10 – Install the Hood Louver Panel onto hood and assemble nylon locknuts to threaded studs. Tighten nuts
just enough until they touch the hood steel.
DO NOT OVERTIGHTEN NUTS. Overtightening
will cause distortion on Hood Louver.
Step 11 - Re-install hood onto vehicle and re-mount the two windshield bumpers and u-shape tie down bracket.
That’s it, you’re done.
Send your OFFROAD pictures to
. If we choose any one of your pictures to be used on
our website, We send you a FREE Hyline Offroad T-Shirt.
C:\Users\RHerd\AppData\Local\Temp\CJ-50HLP InstallationInstructions.doc
Page 4 of 4
REV 0 06/17/09
Installation instructions provided must be read and followed exactly when installing
product. Failure to do so could potentially result in injury or death of any occupants
in the vehicle. WEAR SEAT BELTS AT ALL TIMES WHEN DRIVING!
Though our products are rugged, they are primarily designed and built to enhance the appearance of the
vehicle and will not protect from death or injury in the event of an accident. Adhere to all vehicle
manufacturers specifications
Attention