GrimmSpeed Subaru Up pipe User Manual
Page 3
G
rimm
s
peed
3
30.
Loosely install (2) 14mm bolts from crosspipe to passenger side
exhaust manifold collector. Remember to replace gasket.
31.
First torque back-most 14mm nut on passenger side exhaust
manifold collector to engine head. Followed by remaining (2) 14mm
nuts that hold passenger side exhaust manifold collector to engine
head.
32.
Torque (2) 14mm nuts/bolts from passenger side exhaust manifold
collector to up pipe.
33.
Torque (2) 14mm nuts/bolts from passenger side exhaust manifold
collector to crosspipe.
34.
Torque (5) 14mm nuts from up pipe to turbo.
35.
Reinstall passenger side exhaust manifold collector o2 bung.
36.
Reinstall downpipe.
37.
Reinstall plastic splash guard.
38.
Reinstall turbo heatshield.
39.
Reinstall intercooler and BOV.
NOTE: When bolting up the new GrimmSpeed Up Pipe, make sure to
loosely put all up pipe, turbo, manifold bolts on…do NOT tighten down until
all bolts are on. This will ensure proper fitment and will make the install
much easier.
Please contact us if you have any questions during installation. 651-414-
Thank you for your purchase!