GrimmSpeed Strut Bar - Manual (Page 3)

4. Rock on! Now, reinstall the four (4) nuts securing the bar. Get them all finger
tight before using a torque wrench to apply 12 ft-lbs to each. It doesn’t sound
like much, but it’s the factory spec and provides plenty of clamping force.
Figure 4: Torquing fasteners
5. Alright, your brace is all set. The last step is to install the anti-abrasion sheath
on the AC line that crosses under the brace. You’ll want to slip the included
sheath over the line and then, using the two included zipties, you’ll secure the
line to the fuel line bracket. This solution emulates that of the factory lines
and keeps the AC line out of the way without putting undue tension or stress
into the line, nor the fuel line bracket. Best of all, it is easily done and undone
as necessary, when working on your vehicle.
Torque to 12 ft-lb