Adjusting the door opening angle, Changing the door spring – Bosch 24iw50nsp User Manual

Page 41

Text mode
Original mode

30. Adjusting the door opening

angle

Depending on the installation situation, it may be
necessary to adjust the door opening angle. A door
opening angle of 115° has been set at the factory.
To adjust the door opening angle to 90°:
q Open door to 90°.

q Insert the banking pin through the boreholes which

are now vertically aligned and drive in with
a hammer.

31. Changing the door spring

To adjust the door spring:

q Rotate the adjusting screw with a crossĆhead

screwdriver.

I = maximum spring tension

0 = no spring tension