GrimmSpeed License Plate User Manual
Page 3
G
rimm
s
peed
3
4. Now you will choose the correct orientation of your license plate bracket. You can choose the height
and side to side location of the bracket by which row of slots you thread the U bracket bolts into. You
may need to flip the license plate 180º to get the desired height. When the desired location is found for
the height and side to side location, tighten the two M8x12 bolts into the U bracket with the license
plate bracket in between using a 5mm hex wrench. If you need to make adjustments to the angle, you
can loosen the U bracket M8x25 bolt and retighten.
5. When the desired location of the bracket is chosen, tighten all three adjustment bolts using a 5mm
hex wrench.
6. Now it is time to mount the plate. If you are using a license plate frame, use the M5x12 screws and
tighten them down with a 3mm hex wrench. If no frame is used, use the shorter M5x6 screws.
Please contact us if you have any questions during installation. 612.379.0000 or
.
AIM: GrimmSpd / MSN: [email protected]
Thank you for your purchase!