Ignition, Ignition -6 – SkyTrak 6036 Operation Manual User Manual
Page 44

Section 3 - Controls and Indicators
3-6
31200749
Ignition
• Position 0 - Engine off, no voltage available.
• Position 1 - Voltage available for all electrical functions. Wait to start engine until
engine pre-heat indicator light goes out.
• Position P - Engine run.
• Position 2 - Engine start. In the event the engine does not start, rotate key to
position 0 then back to position 2 to re-engage the starter.
OH4740
0
1
P
2
This manual is related to the following products: