SkyTrak 6036 Operation Manual - Manual (Page 132)

Section 7 - Lubrication and Maintenance
7-24 31200749
Engine Cooling System
A. Engine Coolant Level Check
If Equipped for ULS
1. Perform “Shut-Down Procedure” on page 4-3.
2. Open rear access door.
3. Coolant level should be visible in surge tank (2).
4. If coolant is low, allow fluid to cool.
5. Remove surge tank cap (4) slowly. Add coolant as required.
6. Replace surge tank cap.
7. Close and secure rear access door.
Note: When filling coolant, the maximum fill rate is 2.5 gallon per minute (9.5 liter
per minute)
10
OW0970 OW1070
OH4870
2 1
IF EQUIPPED FOR ULS