SkyTrak 6036 Operation Manual - Manual (Page 120)

Section 7 - Lubrication and Maintenance
7-12 31200749
7.5 OPERATOR MAINTENANCE INSTRUCTIONS
Fuel System
A. Fuel Level Check
1. Check fuel gauge (1) located on instrument cluster in cab.
2. If fuel is low, proceed to fuel source and perform “Shut-Down Procedure” on
page 4-3.
3. Locate fuel tank (2), turn fuel tank cap (3) and remove from filler neck.
4. Add fuel as needed.
5. Replace and secure fuel tank cap.
Note: Replenish fuel at end of each work shift to minimize condensation.
NOTICE
EQUIPMENT DAMAGE. Do not allow machine to run out of fuel during
operation. See Engine Operation & Maintenance Manual for details prior to
servicing.
10
OW0970 OW0990
OH4810
2
3
1
VIEW OF FUEL TANK
FROM TOP OF MACHINE