SkyTrak 6036 Operation Manual - Manual (Page 133)

Section 7 - Lubrication and Maintenance
7-25 31200749
If Equipped for LS
1. Perform “Shut-Down Procedure” on page 4-3.
2. Open rear access door.
3. Coolant level should be visible in sight gauge (3).
4. If coolant is low, allow fluid to cool.
5. Remove radiator cap (4) slowly. Add coolant as required.
6. Replace radiator cap.
7. Close and secure rear access door.
Note: When filling coolant, the maximum fill rate is 2.5 gallon per minute (9.5 liter
per minute)
OH4920
3
4
IF EQUIPPED FOR LS