ARB 3415010 User Manual
Arb 4x4 accessories, Warning, Arb winch bull bar
Last Rev Date:29/10/2008
Page 1 of 20
Fitting instructions# 3783250
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
Part Number:
3415010
Product
Description:
ARB WINCH BULL BAR
Suited to
vehicle/s:
TOYOTA TUNDRA YEAR MODELS 07 ON
WARNING
REGARDING VEHICLES EQUIPPED WITH SRS AIRBAG:
When installed in accordance with these instructions, the front protection bar does not affect operation of
the SRS airbag.
ALSO, NOTE THE FOLLOWING:
♦ This product must be installed exactly as per these instructions using only the hardware supplied.
♦ In the event of damage to any bull bar component, contact your nearest authorised ARB stockist.
Repairs or modifications to the impact absorption system must not be attempted.
♦ Do not use this product for any vehicle make or model, other than those specified by ARB.
♦ Do not remove labels from this bull bar.
♦ This product or its fixing must not be modified in any way.
♦ The installation of this product may require the use of specialized tools and/or techniques
♦ It is recommended that this product is only installed by trained personnel
♦ These instructions are correct as at the publication date. ARB Corporation Ltd. cannot be held
responsible for the impact of any changes subsequently made by the vehicle manufacturer
♦ During installation, it is the duty of the installer to check correct operation/clearances of all
components
♦ Work safely at all times
♦
Unless otherwise instructed, tighten fasteners to specified torque
ARB 4x4 ACCESSORIES
Corporate Head Office
42-44 Garden St
Tel:
+61 (3) 9761 6622
Kilsyth,
Victoria
Fax:
+61
(3)
9761
6807
AUSTRALIA 3137
Australian enquiries
North & South American enquiries
Other international enquiries
www.arb.com.au