Class1 Valve - 119138 - Manual (Page 19)

19 Class 1 Valve Manual
p/n: 119138
5.4.3 SPS Electric Valve Controller Connection Description
The module has one connector and the following definitions apply:
Mating connector: AMP 794781-1
Mating terminals: AMP 770988-1
Seal: AMP 794772-0
Wire seal: AMP 794758-1
Cavity plug: AMP 794995-1
Recommended wire gage: 18-26 AWG
PIN DIR CIRCUIT DESCRIPTION
1
◄
IN Supply (+) Vehicle power (positive, +12VDC to +32VDC)
2 ---- Not used
3 ---- Not used
4
►
OUT Reference (+) Valve position supply reference (positive, +5VDC)
5
◄
IN Position signal Valve position signal (analog, 0-5VDC)
6 ---- Not used
7 ---- Not used
8
►
OUT
Valve motor A Valve direction control (± polarity, direction based) (1)
9
►
OUT
Valve motor B Valve direction control (± polarity, direction based) (1)
10
◄
IN
Supply (-) Vehicle power (ground)
(1) CLOSE = positive polarity Valve motor A, ground polarity Valve motor B
OPEN = ground polarity Valve motor A, positive polarity Valve motor B
Connector pin position detail (SPS view).
5. installation