Class1 Valve - 119138 - Manual (Page 17)

17 Class 1 Valve Manual
p/n: 119138
5.4.1 Utilizing the KZCO EH2 Series Electric Actuator (for 2.0” Class1 Valves)
The diagram below shows the typical layout using the SPS Electric Valve controller (117010) with KZCO
EH2 series electrical actuator (p/n 117234-003). The harness part number is 117593-XX (where XX is
the length in feet – 05, 10, 15, 20, 25, 30).
Harness p/n 117593-XX (where XX is the length in feet – 05, 10, 15, 20, 25, 30).
KZCO EH2 series electrical actuator positioning details
Opening: positive polarity on pin B (white wire), ground polarity on pin A (green wire).
Valve moves in counter-clockwise direction (as viewed from top).
Fully open, voltage feedback = 2.80V (± 0.25V).
Closing: positive polarity on pin A (green wire), ground polarity on pin B (white wire).
Valve moves in clockwise direction (as viewed from top).
Fully closed, voltage feedback = 1.00V (± 0.25V).
5. installation