Hale 4DK Series - Manual (Page 2)

ECO NO REV CHANGED FROM BY DATE APVD
04-115 A RELEASED ERB 05/27/2004 M AL
04-149 B UPDATED TO LATEST
DESIGN
LwH 06/30/2004 M AL
HALE PRODUCTS, INC.
A Unit of IDEX Corporation
Conshohocken, PA 19428 USA
DRAW N BY: LwH ISSUE DATE:
CHECKED BY: PRW 06/30/2004
COPYRIGHT ©
NOT TO BE REPRODUCED OR USED TO
MAKE OTHER DRAW INGS OR MACHINER Y
Manual p/n: 029-0020-79-0-B
Printed in U.S.A. © Hale Products, Inc. 2004
All Rights Reserved
NOTICE !
Hale Products cannot assume responsibility for product failure resulting from
improper maintenance or operation. Hale Products is responsible only to the
limits stated in the product warranty. Product specifications contained in this
manual are subject to change without notice.
All Hale products are quality components -- ruggedly designed, accurately
machined, precision inspected, carefully assembled and thoroughly tested. In
order to maintain the high quality of your unit, and to keep it in a ready condi-
tion, it is important to follow the instructions on care and operation. Proper use
and good preventive maintenance will lengthen the life of your unit.
ALWAYS INCLUDE THE UNIT SERIAL NUMBER IN YOUR
CORRESPONDENCE.