Brother NX 600 User Manual
Page 21
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
Changing the Machine Settings 15
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■ List of stitch or machine attributes
The stitch or machine attributes that can be set are listed below. For details on each attribute, refer to the
corresponding reference page.
Attribute
Icon
Details
Reference
Thread tension
Adjusts the tension of the upper thread.
Automatic
reverse/
reinforcement
stitching
Specifies automatic reverse/reinforcement stitching.
Automatic
thread-cutting
Specifies automatic thread-cutting.
Check pattern
Allows combined patterns to be checked.
Left/right
mirror imaging
Mirror images patterns along a vertical axis.
Pattern length
Adjusts the length of satin stitches.
Pattern size
Sets the size of patterns to be large or small.
Repeated/
single sewing
Specifies whether the pattern will be sewn once or
repeatedly.
Stitching
density
Specifies the sewing density of the stitching.
Save settings
Allows adjusted thread tensions and pattern widths
and lengths to be saved.
Needle
position
Specifies where the needle is positioned when the
sewing machine is stopped.
page 16
Twin needle
sewing
Specifies the twin needle.
page 28
Stitch width
control
Allows the stitch width to be adjusted with the sewing
speed controller.
Language
Allows the language used in the screens to be
changed.
page 17
Buzzer
Specifies whether or not a beep is sounded with each
operation.
LCD brightness
Adjusts the brightness of the LCD.
page 16
Vertical pattern
adjustment
Adjusts the up and down position of the pattern.
Horizontal
pattern
adjustment
Adjusts the left and right position of the pattern.