Satin stitching – Brother NX 600 User Manual
Page 104
UTILITY STITCHES
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
98
GETTING READ
Y
CONTENTS
SEWING BASICS
U
T
IL
IT
Y
S
T
ITCHES
APPENDIX
INDEX
g
After sewing is finished, slide the drop feed
lever to
(to the left as seen from the front
of the machine) to raise the feed dogs.
a Back side
• Normally, the drop feed lever is positioned at
the left.
Satin stitching
A decorative stitch can be sewn by changing the
stitch width of a satin stitch. If the sewing machine is
set so that the stitch width can be adjusted using the
sewing speed controller, the stitch width can quickly
and easily be adjusted. In this case, the sewing speed
is adjusted with the foot controller.
a
Connect the foot controller.
• For details, refer to "Starting to sew" (page
b
Attach zigzag foot "J".
• For details, refer to "Replacing the presser
c
Turn on the sewing machine, and then press
(Settings key) in the operation panel.
X
The settings screen appears.
d
Press
,
,
and (Arrow keys) until
is selected.
e
Press
(OK key).
X
The screen for specifying that the stitch
width can be controlled with the sewing
speed controller appears.
f
Press
to
select .
To return to
, press .
X
The machine is now set so that the stitch
width can be controlled with the sewing
speed controller.
1
J