Philips DVDR3435V-37 - Manual (Page 95)

95
VCR VCR VCR
Press [VCR] first.
Fast forward:
When the unit is in stop mode, press [FFW D] to fast forward the videotape.
Rewind:
When the unit is in stop mode, press [REW E] to rewind the videotape.
To cue or review picture during playback (Picture Search):
Press [REW E], [FFW D] during playback.
Press it again and the unit will search in super high speed. (in the SLP mode only)
To freeze the picture on TV screen during playback (Still Mode):
Press [PAUSE F]. Each time you press the button, the picture will be
forwarded by one frame.
If the picture begins to vibrate vertically during the Still Mode, stabilize the
picture by pressing [CHANNEL L / K] or [CH
+ /
-
].
If the picture is distorted or rolling vertically, adjust the vertical hold control
on your TV, if equipped.
Counter Reset:
Press [CLEAR].
To playback in slow motion:
If the noise bars appear on the TV screen, you can reduce it by pressing
[CHANNEL L / K] or [CH
+ /
-
].
Automatic Rewind:
When a videotape is played or fast forwarded to its end, the videotape will
rewind to the beginning, stop and eject itself.
When you playback a videotape recorded in Hi-Fi stereo:
Press [AUDIO] on the remote control to select Hi-Fi or MONO for
playback sound mode.
• If you have connected a stereo TV to this unit, select “HIFI”.
• If you have connected a monaural TV to this unit, select “MONO”.
Other operations
Helpful Hints
• Still/Slow/Pause mode will be
automatically cancelled after 5
minutes to prevent damage to
the videotape and the video
head.
• To return to playback from the
Picture Search/Still/Slow mode,
press [PLAY B].
Search (cont’d)
Your Selection HIFI
MONO Type of
recorded tape
L-channel R-channel
non Hi-Fi tapes Monaural Monaural Monaural
Hi-Fi tapes
recorded in
Hi-Fi stereo
L R L+R
Hi-Fi tapes
recorded main
audio program
Main audio
program
Main audio
program
Main audio
program
Hi-Fi tapes
recorded
second audio
program
Second
audio
program
Second
audio
program
Second
audio
program
TV/ VIDEO VCR DVD
SEARCH AUDIO TITLE RAPID PLAY
OPEN/CLOSE
SETUP DISC MENU
DISPLAY
BACK
OK
REW FFW PLAY
PREV PAUSE NEXT
COMMERCIAL
SKIP
CH TV
VOL
CLEAR REC MODE
.@/: DEF ABC
GHI MNO JKL
PQRS WXYZ TUV
VCR Plus+
TIMER
TIMER
SET
VCR REC DVD REC
DIRECT
DUBBING
STOP
Index search
VCR VCR VCR
An index mark will be assigned at the beginning of each recording you make.
You may skip to a specific marked point by following the steps below.
Press [VCR] first.
1
Press [SEARCH] so that the index search menu appears.
2
Using the Number buttons, enter the number of recordings
you wish to skip within 30 seconds.
INDEX SEARCH
03
3
Press [REW E ], [FFW D] to start index search.
If you want to go in the forward direction, press [FFW D].
If you want to go in the reverse direction, press [REW E].
After index search, the VCR will play the videotape automatically.
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02 01 01 02 03
INDEX MARK
End
of tape Beginning
of tape
CURRENT PROGRAM
Helpful Hints
• Every time a videotape is
recorded, an index mark is
written on the videotape.
• You can make the index mark
up to 20.
1
3
2
E9A90UD_EN.indb 95 E9A90UD_EN.indb 95 6/12/2006 4:23:34 PM 6/12/2006 4:23:34 PM