Philips DVDR3435V-37 - Manual (Page 93)

93
TV/ VIDEO VCR DVD
SEARCH AUDIO TITLE RAPID PLAY
OPEN/CLOSE
SETUP DISC MENU
DISPLAY
BACK
OK
REW FFW
PLAY
PREV PAUSE NEXT
COMMERCIAL
SKIP
CH TV
VOL
DIRECT
DUBBING
STOP
DISPLAY
BACK
OK
REW FFW PLAY
PREV PAUSE NEXT
COMMERCIAL
SKIP
CH TV
VOL
CLEAR REC MODE
.@/: DEF ABC
GHI MNO JKL
PQRS WXYZ TUV
VCR Plus+
TIMER
TIMER
SET
VCR REC DVD REC
DIRECT
DUBBING
STOP
Recording
Playback
Recording and One-touch Timer Recording
VCR VCR VCR
Press [VCR] first.
Before recording, make sure:
• The desired channel is selected by pressing the Number buttons or
[CH +/- ] on the remote control or [CHANNEL L / K] on the front
panel of the unit.
• There is a videotape with a record tab in the unit.
• The desired recording mode is selected in SP (standard play) or SLP (super
long play) mode by pressing [REC MODE] on the remote control.
Recording mode:
Tape speed
Type of tape T160 T120
Recording/Playback Time
T60
2-2/3hours 2hours 1hour SP mode
8hours 6hours 3hours SLP mode
• Stereo or SAP is selected. Refer to page 24.
• Refer to pages 33-34 for instructions on Timer Recording.
1
Press [VCR REC I] to begin the recording.
To temporarily stop recording or to resume it, press [PAUSE F].
After the unit has been in Pause mode for 5 minutes, it will stop
automatically to protect the videotape and the video head from
damage.
2 Press [STOP C ] when the recording is completed.
Accidental erasure prevention
To prevent accidental recording on a
recorded videotape, remove its record
tab. To record on it later, cover the hole
with cellophane tape.
Record tab
Helpful Hint
• To view one channel while
recording another
1) While you are recording on the
unit, press [TV/VIDEO].
2) At the cable box or satellite box,
select the channel you want to
view.
If you have connected the unit to
a cable box or satellite box, refer
to “Connection to a cable box or
satellite box” section on page 15.
1
2,4
5
3
2
1
Playback
VCR VCR VCR
1
Press [ ] or [ STANDBY-ON] on the front panel of the
unit.
When you are playing a videotape, turn the TV on and be sure to
select the input to which the unit is connected.
Press [VCR] first.
2
Insert a prerecorded videotape. Press [PLAY B] to begin
playback.
3
During playback, press [PAUSE F].
Playback will pause and sound will be muted.
4
Press [PLAY B ] to resume play.
5
Press [STOP C ] to stop playback.
6
Press [OPEN/CLOSE A ] to eject the
videotape.
Helpful Hints
• When a videotape without record tab is inserted, the unit will
start playback automatically.
• Tracking will be automatically adjusted upon playback. To adjust
the tracking manually, press [CHANNEL L / K] on the front
panel of the unit or [CH
+ /
-
] on the remote control.
6
E9A90UD_EN.indb 93 E9A90UD_EN.indb 93 6/12/2006 4:23:32 PM 6/12/2006 4:23:32 PM