Brother FAX-335MC - Manual (Page 53)

Q U I C K - D I A L N U M B E R S A N D D I A L I N G O P T I O N S 7 - 2
5
Press or to select the type of number and press Function/Set .
6
Press or to select if you set ANTI JUNK to ON (OFF) and press
Function/Set .
7
Press to Step 2 to store another One Touch number—OR—Press Stop to exit.
When you dial an QUICK-DIAL number, the screen displays the name you’ve stored,
or, if you haven’t stored a name, the number you’ve stored.
You can use chain dialing to store long dialing sequences. For example, to store 9 1
201 555 1234 987 65 4321, divide the number into two parts. Store the first part as a
Chain type number (this tells the system that the dialing sequence is not complete).
CHAIN—9 1 201 555 1234
The last part of the One Touch number must be stored as any of the other following
three types.
FAX or F/T or TEL—987 65 4321
Now, when you dial, just press the two keys (one after the other, in order) where
you’ve stored the two parts of the number.
Storing Speed Dial Numbers/Storing Junk Fax/Call
Numbers
You can store Speed Dial numbers, when you dial by pressing only four keys. There
are 60 (FAX-235), 100 (FAX-236/FAX-335MC) Speed Dial locations.
1
Press Function/Set , 6 , 2 .
2
Use the dial pad to enter a two-digit location
and press
Function/Set . (01-60) FAX-235,
(00-99) FAX-236 and FAX-335MC.
FAX a fax only number
TEL a telephone (voice) number
F/T both a fax and telephone (voice) number
CHAIN a number (usually an access code) for chain dialing.
If you set ANTI JUNK to ON, the number is registered as the Junk Fax or Call in the
machine. The machine will reject receiving the fax message or telephone call.
If you don’t use the Caller ID subscriber service offered by your local telephone
company, you don’t use the Anti-Junk function.
If you must wait for another dial tone at any point in the dialing sequence, store a
pause at that place in the number by pressing
Redial/Pause . Each key press adds a
3.5 second pause.
If you want to store a Junk number, you have to set ANTI JUNK to ON in Step 6.
SPEED-DIAL? #
#05:
ENTER & SET