Brother FAX-335MC - Manual (Page 46)

6 - 6 S E T U P S E N D
Composing Your Own Comments
(For FAX-236/335MC Only)
1
Press Function/Set , 3 , 2 . The screen displays: COVERPAGE NOTE.
2
Press or to choose position 5 or 6 for your customized comment.
3
Press Function/Set .
4
Use the dial pad to enter your customized comment (up to 27 characters).
5
Press Function/Set . The screen displays:
6
Press 1 if you want to select additional
settings. The display returns to the SETUP
SEND menu—OR—Press
2 to exit.
Contrast
If your original is very light or very dark, you might want to set the contrast
accordingly. Use LIGHT to send a very light original. Use DARK to send a very dark
original.
1
Place the original face down in the ADF.
2
Press Function/Set , 3 , 3 .
3
Press or to select AUTO, LIGHT or DARK and press Function/Set .
4
Press 2 if you have finished choosing settings, and go to Step 5—OR—Press 1 if you
want to select additional settings. The display returns to the SETUP SEND menu.
5
Enter a fax number and press Start to send a fax—OR—Press Copy/Help to make
a copy.
Resolution
STANDARD—suitable for most typed originals.
FINE—good for small print; transmits a little slower than standard resolution.
S. FINE—good for small print or artwork; transmits slower than fine resolution.
PHOTO—use when original has varying shades of gray; slowest transmission time.
You must press Resolution (before you send the fax) to select the resolution for the
type of original you’re sending.
If the receiving fax machine does not have the resolution you select, the transmission
will fall back to the next available resolution on receiving machine.
1.YES 2.NO
NEXT
ACCEPTED