Brother FAX-335MC - Manual (Page 30)

4 - 6 I N I T I A L S E T U P
Changing the Key Lock System Password
1
Press Function/Set , 0 , 2 .
2
Press or to choose SET PASSWORD.
3
Press Function/Set .
The screen prompts you to enter the old
password.
4
Enter the current password.
5
Press Function/Set .
The screen prompts you to enter the new
password.
6
Enter a 4-digit number as a new password.
7
Press Function/Set .
The screen prompts you to re-enter the new
password.
8
Enter the new password again and press Function/Set .
9
Press Stop to exit.
Switching Key Lock System ON
1
Press Function/Set , 0 , 2 . The screen displays
2
Press or to choose SET KEY LOCK.
3
Press Function/Set . The screen prompts you
to enter the password.
4
Enter a 4-digit password, followed by
Function/Set .
This is the same as the password of your machine already stored.
The screen displays ACCEPTED for 2 seconds, followed by KEY LOCK MODE -
Key Lock System is now switched ON.
If the password you enter at Step 8 is incorrect, the screen would display WRONG
PASSWORD. After 2 seconds the display will then return to select menu for Function
0. You must then try again to switch Key Lock System ON.
If the password you enter at Step 4 is incorrect, the screen would display WRONG
PASSWORD. After 2 seconds the display will then return to select menu for Function
0. You must then start from Step 1 to set Key Lock System.
SET KEY LOCK
SET PASSWORD
ENTER & SET
OLD PASSWD:----
ENTER & SET
NEW PASSWD:----
ENTER & SET
VERIFY:----
SET KEY LOCK
SET PASSWORD
ENTER & SET
PASSWORD:----