Philips SACD1000 - Manual (Page 24)

English
24 OPERATION
V Personal preferences
In this mode you can set your personal preferences for a
number of player features. Some settings must always be
selected.This depends on the type of audio equipment
connected. For this see the section ‘Connecting to audio
equipment.’
General operation
● Press MENU SYSTEM on
the remote control.
● Select V in the menu bar
and press w (down cursor).
➤ The Personal Preferences
menu will appear.
● Use the t u v w (left/right/up/down) keys to
toggle through the menus, sub-menus and sub-menu
options.
➤ When a menu item is selected, the cursor keys
(on the remote control) for operating the item will
be displayed next to the item.
● Press OK to confirm and return to the main menu.
The following items can be adapted:
p Picture
TV Shape
If you have a wide screen (16:9) TV, select 16:9.
If you have a regular (4:3) TV, select 4:3.
In this case you can also choose between:
Letterbox for a ‘wide-screen’ picture with black bars top
and bottom, or Pan Scan, for a full-height picture with
the sides trimmed, provided these opations are available
on the disc in play. If a disc has Pan Scan, the picture will
then move (scan) horizontally to keep the main action
on the screen.
Black level shift (NTSC only)
Adapts the color dynamics to obtain richer contrasts.
Select
ON or OFF.
Video shift
Factory setting is such that the video will be centered on
your screen. Use this setting to personalize the position
of the picture on your TV by scrolling it to the left or
right.
q Sound
Analogue output
Select Stereo, Dolby Surround, 3D Sound or Multi-
channel. See the section ‘Digital and Analogue output
Settings for DVD/VCD’. Factory setting is Multi-channel.
Multi-channel
: Select this setting when using a Multi-
channel audio/(video) reciever with six
inputs. In this mode, the player will
perform Dolby Digital 5.1-channel
decoding when applicable, and Dolby
Pro Logic decoding on DVD-Video and
Video-CD discs with 2-channel
soundtracks. No Dolby Pro Logic
decoding is done with (Super) Audio
CD discs.
Dolby Surround : Select this setting when using a
equipment with a Dolby Surround
Pro Logic decoder. In this setting, the
5.1 audio channels (Dolby Digital,
MPEG-2) are downmixed to a Dolby
Surround-compatible 2-channel output.
3D-Sound : In a setup without rear speakers
(analogue stereo output), 3D Sound
remixes the six channels of digital
surround into a two-speaker output
while retaining all of the original audio
information. The result is the listening
sensation of being surrounded by
multiple speakers.
Night Mode
Optimizes the dynamics of the sound with low-volume
playback. This setting can only be used with discs that
support the Night Mode feature.
TV shape
Black Level shift
Video shift
OK to exit
LETTERBOX PAN SCAN
VIEWING ON 16:9 VIEWING ON 4:3
01_SACD1000_USA_23811_D1 11-12-2000 16:14 Pagina 24