Philips HD8930-05 - Manual (Page 40)

36 ENGLISH
GENERAL MENU
TONE
CUP-WARM. SURFACE
OFF
OFF
ON
ON
To change the machine operating settings.
This function activates/deactivates the acoustic alarms.
This function allows activating/deactivating the cup-warm-
ing surface located on the upper part of the machine.
To deactivate the acoustic alarms.
To deactivate the cup-warming surface.
To activate the acoustic alarms.
To activate the cup-warming surface.
ECOMODE
OFF
ON
This function enables activating the boilers on the machine
to allow saving energy.
This way, only the coff ee boiler is activated at
machine start-up. The machine saves energy but
needs longer time to dispense milk-based bever-
ages.
This function activates all the boilers at every ma-
chine start-up to be immediately able to prepare
all kinds of beverages. The power consumption
is higher this way, because the machine is always
ready for use.
15 MINUTES
30 MINUTES
60 MINUTES
180 MINUTES
STAND-BY SETTINGS
To set the time interval for the machine to go into stand-by
mode after the last brewing.
The default time value is «after 30 minutes».
Once the set time has elapsed, the machine goes
into stand-by mode.
Press any button to turn the machine on again.
After performing the function diagnostics and the
warm-up phase, the machine is again ready for
use.
General Menu