Philips HD8930-05 - Manual (Page 16)

12 ENGLISH
Measuring and Adjusting Water Hardness
Measuring water hardness is very important in order to correctly manage
the "INTENZA+" fi lter and the frequency with which the machine must be
descaled.
1 Immerse the water hardness test strip - provided with the machine - in
water for 1 second.
Note: The test strip is only valid for one measurement.
2 Check how many squares change colour and refer to the table.
Note: The letters correspond to the references that are located in the base of
the Intenza fi lter. The fi lter must be adjusted according to this measurement.
3 The numbers correspond to the settings indicated in the following
machine adjustments.
More precisely:
1 = (very soft water)
2 = (soft water)
3 = (hard water)
4 = (very hard water)
23
4
A
B
C
In
tenza Ar
oma S
y
st
em
M
achine wat
er har
dness setting
1
4 Hold the " " button pressed for 5 seconds to access the program-
ming mode.
5 To select the "MACHINE MENU" option, press the " " button.
Press the " " button for access.
6 Press the " " button until the "WATER MENU" option can be selected.
Press the " " button for access.
MACHINE MENU
GENERAL MENU
DISPLAY MENU
WATER MENU
MAINTENANCE
MACHINE MENU
GENERAL MENU
DISPLAY MENU
WATER MENU
MAINTENANCE
MENU
BEVERAGE MENU
MACHINE MENU