Philips HD8930-05 - Manual (Page 19)

ENGLISH 15
6 Place a large container under the hot water wand.
7 Hold the " " button pressed for 5 seconds to access the program-
ming mode.
8 To select the "MACHINE MENU" option, press the " " button.
Press the " " button for access.
9 Press the " " button until the "WATER MENU" option can be selected.
Press the " " button for access.
10 Press the " " button until the "ACTIVATE FILTER" option can be se-
lected.
Press the " " button for access.
11 Press the " " button.
Note: To quit the procedure press the “ ” button until the logo is
displayed.
12 Press the " " button to confi rm the introduction of the new fi lter.
13 Press the " " button to confi rm.
Wait until the machine stops dispensing the necessary water to activate
the fi lter.
At the end of the cycle, remove the container that you had previously
placed under the hot water wand.
Note: At the end of the procedure, the display automatically returns to the
product brewing page. If the water fi lter is not available, insert the small
white fi lter previously removed (see step 1) into the tank.
MENU
BEVERAGE MENU
MACHINE MENU
WATER MENU
HARDNESS
ENABLE FILTER
ACTIVATE FILTER
ACTIVATE FILTER?
ACTIVATE FILTER
YES NO
INSERT FILTER.
FILL THE TANK
ACTIVATE FILTER
PLACE A CONTAINER
UNDER THE
WATER SPOUT
ACTIVATE FILTER
ACTIVATE FILTER
MACHINE MENU
GENERAL MENU
DISPLAY MENU
WATER MENU
MAINTENANCE
MACHINE MENU
GENERAL MENU
DISPLAY MENU
WATER MENU
MAINTENANCE