Philips HD8930-05 - Manual (Page 18)

14 ENGLISH
"INTENZA+" Water Filter
The “INTENZA+” water fi lter can improve the quality of water. Using the
“INTENZA+” fi lter will prevent limescale from building up and will ensure
a much more intense aroma to your espresso coff ee. We therefore recom-
mend you to install the “INTENZA+” water fi lter. You can purchase it at your
local dealer, on-line at the Philips on-line shop at http://shop.philips.com or
at the authorised service centres.
2 Remove the "INTENZA+" water fi lter from its package. The fi lter should
be set according to the measurements performed to set water hard-
ness. Use the water hardness test strip provided with the machine.
Set the "Intenza Aroma System" as specifi ed on the fi lter package (see
section "Measuring and Adjusting Water Hardness").
A = Soft water
B = Hard water (standard)
C = Very hard water
ù
3 Immerse the "INTENZA+" water fi lter vertically (with the opening posi-
tioned upwards) in cold water and delicately press its sides so as to let
the air bubbles out.
1 Remove the small white fi lter from the tank and store it in a dry place
sheltered from dust.
Measuring water hardness is very important in order to correctly manage
the "INTENZA+" water fi lter and the frequency with which the machine
must be descaled.
4 Put the fi lter into the empty tank. Press it until its limit stop.
5 Fill the tank with fresh drinking water and reinsert it into the machine.