Philips HD8930-05 - Manual (Page 38)

34 ENGLISH
DEFAULT
Default Parameters
For each beverage it is possible to reset the original standard values as-
signed by the manufacturer. After selecting this function, the beverage
customized settings are deleted.
WATER QUANTITY
This section allows programming the amount of water to be dispensed
when pressing the corresponding button. The bar allows you to adjust the
exact amount of water to dispense.
“ ” button = “ ” (to increase the amount of hot water in the cup).
“ ” button = “ ” (to reduce the amount of hot water in the cup).
Activating Steam (BEVERAGE MENU -> SPECIAL BEVERAGES)
These settings are valid only for activating the steam function. When the
activation is complete the menu will be available, and the user will be able
to activate it by following the procedure described on page 31.
Press the “ ” button to select “STEAM” and the “ ” button to enter
the menu.
Hot Water Parameters (BEVERAGE MENU - >SPECIAL BEVERAGES)
These settings are valid only for programming hot water dispensing. HOT WATER
WATER QUANTITY
DEFAULT
Press the “ ” button to select “ON” and the “ ” button to activate the
steam function.
Press the “ ” button once or more times to exit.
SPECIAL BEVERAGES
HOT MILK
AMERICAN COFFEE
STEAM
STEAM
OFF
ON
STEAM
OFF
ON