Vitek VT-3480 GY - Manual (Page 7)

ENGLISH
7
. Place the disc on the spindle, label side up.
Be sure to place 8 cm disc in the middle of the disc compartment.
5. Close the CD door.
6. Press the “CD /II” button to start playback.
To stop playback
Press the “” button.
To remove the discs
In the stop mode, press the PUSH OPEN/ CLOSE portion on the CD door. Take out the disc.
Caution!
• Do not place two discs in the spindle at the same time.
• Do not play discs with a non-standard shape (other than circular). It may cause malfunctions.
• If TV or radio interference occurs during CD operation, move the unit away from the TV or radio.
• If a disc is damaged, scratched, dirty, or loaded upside down, the disc will not play back.
Cd or MP3/wMA disc Playback
Various disc functions
Function Main unit Operation
Play /II Press in the stop mode.
Stop Press in the playback mode.
Pause /II
Press in the playback mode. Press the button to
resume playback from the paused point.
Track up/ Track down
Press in the playback or stop mode.
If you press the button in the stop mode, press the
/II
button to start the desired track.
Fast forward/Fast reverse
Press and hold down in the playback mode.
Release the button to resume playback.
Note
Rewritable multi session CD-RW- discs which writing is not finished, can still be played.
To change the display (MP3 discs only)
Whilst in the stop mode or playback mode, press the MEMORY/DISP button. ID3 will on.
Press again the MEMORY/DISP button. ID3 will off.
3480.indd 7 23.04.2007 16:02:54