Vitek VT-3480 GY - Manual (Page 12)

ENGLISH
2
• This unit can display Folder Name or File
Name up to 32 characters.
• The display playback time may not be
displayed correctly when playing back a
variable bitrate file.
• Time display cannot be changed by the
MEMORY/DISP button.
• Track number, title name and artist name
can be displayed by pressing the MEMORY/
DISP button during file playback or pause
mode.
• WMA meta tag also supports title, artist and
album name which are recorded in WMA
files.
• Copyright protected WMA files cannot be
played back.
Programmed play (Folder mode)
. Whilst in the stop mode, press the MEMORY/
DISP button to enter the programming save
mode.
MEMORY
2. Press the FOLDER (\/ or /\) button to select
the desired folder.
3. Press the MEMORY/DISP button to save the
folder number.
. Press the “ or ” button to select the
desired track.
5. Press the MEMORY/DISP button to save the
track number.
MEMORY MEMORY
6. Repeat steps 2 - 5 for other folder/tracks. Up
to 32 tracks can be programmed.
7. Press the “USB/II” button to start playback.
Radio
Listening to the radio
Note
This product can receive FM stereo/FM mono
and MW mono broadcast. MW stereo broad-
casts will not be played in stereo.
Tuning
. Press the ON/STAND-BY button to turn the
power on.
2. Press the TUNER/BAND button repeatedly
to select the desired frequency band (FM or
MW).
3. Press the “TUNING (\/ or /\)” button to tune
in to the desired station.
Manual tuning
Press the TUNING button as many times as re-
quired to get proper signal quality.
Auto tuning
When the TUNING button is pressed for more
than 0.5 seconds, scanning will start automati-
cally and the tuner will stop at the first receivable
broadcast station with strong signal.
Notes
• When radio interference occurs, auto scan
tuning may stop automatically at that point.
• Auto scan tuning will skip weak signal
stations.
• To stop the auto tuning, press the TUNING
button again.
To receive an FM stereo transmission:
Press the TUNER/BAND button to display the
“ST” indicator.
• “ ” will appear when an FM broadcast is in
stereo.
• If the FM reception is weak, press the
TUNER/BAND button to extinguish the “ST”
indicator. The reception changes to mono,
and the sound becomes clearer.
3480.indd 12 23.04.2007 16:03:00