Brother 882-S90/S91 - Manual (Page 89)

SEWING THE STITCHES
78
Heirloom
■ Hemstitching (1) (Daisy Stitch)
Use for sewing tablecloths, decorative hems, and
decorative stitching on shirt fronts.
a
Insert a type 130/705H, size 100/16 Wing
needle.
b
Select a stitch and attach presser foot “N”.
* Select any stitch between 3-01 and 3-25.
c
Start sewing.
Example: Illustration of finished product
■ Hemstitching (2) (Drawn Work)
a
Pull out several threads from one area on a
piece of fabric to open the area.
* Pull out 5 or 6 threads to leave a 3 mm
(approx. 1/8 inch) area open.
b
Select .
c
Attach presser foot “N”. With the right side
of the fabric facing up, sew one edge of the
open area.
Memo
Use a light to medium weight homespun fabric
with a little stiffness.
CAUTION
• The “Automatic Threading” button cannot be
used. Thread the wing needle by hand, from
front to back. Using the “Automatic
Threading” button may result in damage to the
machine.
• A more attractive finish can be obtained if you
use a “130/705H Wing” needle when sewing
these patterns. If using a wing needle and the
stitch width has been set manually, check that
the needle will not touch the presser foot by
carefully rotating the handwheel before
starting sewing.
Memo
• For details on each stitch, refer to the
“STITCH SETTING CHART” at the end of
this manual.
Memo
Loosely woven fabrics work best for this.
Memo
For details on each stitch, refer to the
“STITCH SETTING CHART” at the end of this
manual.
N