Brother 882-S90/S91 - Manual (Page 137)

BEFORE EMBROIDERING
126
BEFORE EMBROIDERING
Embroidery Step by Step
Follow the steps below to prepare the machine for embroidery.
Step # Aim Action Page
1 Presser foot attachment Attach embroidery foot “W”. 127
2 Checking the needle Use needle 75/11 for embroidery. * 36
3 Embroidery unit attachment Attach the embroidery unit. 128
4 Bobbin thread setup For the bobbin thread, wind embroidery bobbin thread and set it in place. 19
5 Fabric preparation Attach a stabilizer material to the fabric, and hoop it in the embroidery frame. 138
6 Pattern selection Turn the main power to ON, and select an embroidery pattern. 130
7 Embroidery frame attachment Attach the embroidery frame to the embroidery unit. 143
8 Checking the layout Check and adjust the size and position of the embroidery. 144
9 Embroidery thread setup Set up embroidery thread according to the pattern. 25
* It is recommended that a 90/14 needle should be used when embroidering on heavy weight fabrics or stabilizing products (for example;
denim, puffy foam, etc.).
Step 3
Step 1, 2
Step 7 Step 5
Step 4
Step 6, 8
Step 9