Moving a point – Brother 882-S90/S91 User Manual
Page 215
ENTERING STITCH DATA
204
g
Repeat the steps above for each point that
you have drawn on the grid sheet until the
stitch design is drawn on the screen as a
continuous line.
*
Press
to delete a selected point entered.
*
Press
to sew a test-run of the stitch.
Press
to return to the original screen.
*
Press
to view an image of the stitch.
■ Moving a Point
a
Press
or
to move
to the
point that you want to move.
*
To move
to the first point, press
.
*
To move
to the last point, press
.
*
You can also move
by using the touch pen.
b
Use
to move the point.
Memo
• If you have entered points that are too close
together, the fabric may not feed properly.
Edit the stitch data to leave a larger space
between points.
• If the stitch design is to be repeated and
linked, make sure that linking stitches are
added so that the stitch designs will not
overlap.
a Linking stitches
a