Bryant 352MAV - Manual (Page 10)

1. The inducer will start and run on high speed.
2. After 7 sec the inducer motor will continue to run while the
hot surface ignitor HSI is energized for 15 sec, then
de-energized.
3. The inducer motor changes to low speed and continues to
run the remainder of the component self-test.
4. The blower motor operates on LO GAS-HEAT speed for 7
sec.
5. The blower motor operates on HI GAS-HEAT speed for 7
sec.
6. The blower motor operates on HI COOL speed for 7 sec.
7. The gas valve and humidifier terminal HUM are not
energized for safety reasons.
A99118
Fig. 13—Inducer Housing Drain Tube
A99119
Fig. 14—Funnel in Drain and Antifreeze
Running Through Trap
—10—