Black Box MWU2000-X21 - Manual (Page 35)

35
2.048Mbps Wireless Modem
TECHNICAL: 0118 931 2233
Range Tables
Use the following tables to calculate the antennas and cables that will best suit your
transmit/receive range requirements (assuming line-of-sight between 2.048Mbps Wireless
Modem Master and Slave units). The tables are based on the assumption that the default
modem rate is being used. If a modem rate higher than the default rate is being used, the
achievable range should be estimated according to the actual modem rate.
Note: When selecting antennas, cables and RF accessories for your specific link, note that
exceeding the recommended power level of the input signal to the 2.048Mbps Wireless
Modem, may significantly reduce performance.
Maximal power level input into the Rx port should not exceed -10 dBm. For links with a radio
link rate of 3 Mbps, maximal power level input should not exceed -25 dBm.
Table 2-4. European Range Table
Table 2-5. USA Range Table