B&B Electronics Celeron M Universal Network Controller with PC/104 Extension UNO-2170 User Manual
Page 18
2.3.7 IRQ and Address Setting
The IRQ and I/O address range of COM3 and COM4 are listed below:
COM3: 3E8H, IRQ10 (Independent IRQ), IRQ10 (Share IRQ)
COM4: 2E8H, IRQ5 (Independent IRQ), IRQ10 (Share IRQ)
Vector address for share IRQ: 1D0H
You can set “Share IRQ＂ or “Independent IRQ＂ by the first switch of
SW4.
Table 2.2: IRQ Setting via switch 1 at SW4
Switch 1 at SW4 setting
Function
Shared IRQ (Default)
Independent IRQ
You can adjust the transmission rate by the second switch of SW2.
Table 2.3: Speed Setting via switch 2 at SW4
Switch 2 at SW4 setting
Function
Speed X 8*
Speed X 1 (Default)
* To increase the normal baud rates by eight times, (e.g. if 115.2K bps is set,
the baud rate will be increased to 921.6K bps), set switch 2 of SW2 to
“on＂
UNO-2170 User Manual 12