B&B Electronics Celeron M Universal Network Controller with PC/104 Extension UNO-2170 - Manual (Page 10)

1.3 Safety Precautions
The following sections tell how to make each connection. In most cases,
you will simply need to connect a standard cable.
Warning! Always disconnect the power cord from your chassis
whenever you are working on it. Do not connect while
the power is on. A sudden rush of power can damage
sensitive electronic components. Only experienced
electronics personnel should open the chassis.
Caution! Always ground yourself to remove any static electric
charge before touching UNO-2170. Modern electronic
devices are very sensitive to static electric charges. Use
a grounding wrist strap at all times. Place all electronic
components on a static-dissipative surface or in a
static-shielded bag.
UNO-2170 User Manual 4